Programming - Honeywell IAQPoint2 User Manual

Air quality monitor

Hide thumbs Also See for IAQPoint2:

Table of Contents

Available languages

Programming

User Interface

As indicated by the green LED for each port, each of the ports (up to 8)

is analyzed following a specific time interval based on the type of probe

used and the length and course of the sensor tubing. When the gas

concentration is channeled and measured at the transmitter, the value

is stored until the next reading.

Visual Indicators

I/O Normal operation:

Alarm Level A:

Alarm Level B:

Alarm Level C:

Programming Keys:

Up /Down Arrows:

First Red LED

Second Red LED

Both Red LEDs blink

Access the programming or acknowledge a

programming field or value

Select a programming field or value Scan the

reading at a specific sampling zone.

SQN8X User Manual

Show Quick Links

Table of Contents