Honeywell IAQPoint2 User Manual page 1275

Installation of the converter simply requires the physical mounting of the
enclosure and connection of the power and output lines.
Mounting Instructions
1. Select installation location
2. Measure and mark mounting holes (as shown)
3. Pre-drill or prepare as required by mounting surface (drywall plugs,
etc.)
4. Position unit and align mounting holes with markings and install
necessary screws.
Note: Remember to remove knock-outs before mounting the unit.
512228
2/08
Installation
"
13/32
6
420I User Manual
Honeywell
"
9/16
10
Installation
Mounting Instructions
15