Wiring Details; Pcb Wiring - Honeywell IAQPoint2 User Manual

Wiring Details

PCB Wiring

Wiring Details
PCB Wiring
Opening the SQN8x housing provides access to the terminal boards.
Connect the 24 Vac power supply to the power supply terminal. The
power supply should come directly from the electrical panel on a
dedicated circuit.
Connect the auxiliary device to the relay outputs: Relay 1 is activated,
by default, when gas concentrations reach alarm level A. Relay 2 is
activated when gas concentrations reach alarm level B and relay 3
signals a failure (breakdown). The functioning sequence is completely
programmable, thus programming can be modified if it was requested
at the time of order.
16 SQN8X User Manual
512226
Honeywell
2/08