Available Configuration For 301C - Honeywell IAQPoint2 User Manual

Air quality monitor

Hide thumbs Also See for IAQPoint2:

Table of Contents

Available languages

Available Configuration for 301C

This function is only available with recent versions (2005 onward).

When used with the 301C, it is in listening mode only; the broadcast

mode must be activated on the controller side.

Addresses can be selected in groups of 8 (i.e. 1 - 8, 9-16 and so on

until 89-96. See DIP Switch settings for further details). There are also

three (3) statistic values available for selected groups: Minimum,

Maximum and Average.

.Each converted signal is associated to the following outputs;

Output J20: Average;

Output J18: Minimum;

Output J16: Maximum.

420I User Manual

Show Quick Links

Table of Contents