Care And Maintenance - Honeywell Howard Leight VeriPRO Quick Reference Manual

4.1 Care and Maintenance

Daily Listening Check
To check headphone output, the VeriPRO administrator should
perform a short listening check prior to testing:
• Connect all hardware and open the VeriPRO program.
• Start a Complete Check at 500 Hz and balance the loudness of
the tones. For a listener with normal hearing, if several Cannot
Match responses are required before you reach a loudness
balance, the headphone output may be questionable. A
calibration check is recommended.
Cleaning of Headphones
Recommendations for cleaning the VeriPRO headphones are
similar to other earmuffs. Wipe down the cushions and headband
with mild soap and damp cloth, and dry before use. Do not
submerge headphones in water. Replace the cushions if they
appear stiff or cracked. Extra cushions are included with each
VeriPRO system, and can also be ordered from your safety
distributor.
Calibration Check
We recommend an annual calibration check of the VeriPRO audio
processor and headphones. Contact your Howard Leight
representative for details.
16 16