Status Display - Honeywell IAQPoint2 User Manual

Air quality monitor
Hide thumbs Also See for IAQPoint2:
Table of Contents

Advertisement

Available languages

Available languages

Detection Range and Alarm Levels
Gas Detected
CO
Carbon monoxide
NO
Nitrogen dioxide
2
O
Oxygen
2
R-11
Refrigerant Q1
R-12
Refrigerant Q1
R-22
Refrigerant Q1
R-123 Refrigerant
R-125 Refrigerant Q1
R134A Refrigerant Q1
COMB Combustibles
A different alarm level setting can be programmed to meet the
requirements of a particular use.

Status Display

The SQN8x will display the status of each zone, starting with Zone 1
and ending with Zone 8. This display is on a continuous loop. However,
if a given zone is in alarm state, the system will display the status of that
zone intermittently between the displays of the other zones monitored
by the system.
For example, if Zone 2 is in alarm status, the system will display the
zones in the following order: Zone 1; Zone 2; Zone 3; Zone 2, Zone 4;
Zone 2, etc.
512226
2/08
Range
0-255 ppm
0-10.2 ppm
0-25.5% Vol. 19.5% Vol.
0-1,020 ppm
0-1,020 ppm
0-1,020 ppm
0-1,020 ppm
0-1,020 ppm
0-1,020 ppm
0-102% LEL
SQN8X User Manual
Honeywell
Detection Range and Alarm Levels
Alarm A
Alarm B
25 ppm
200 ppm
0.72 ppm
2 ppm
22% Vol.
250 ppm
500 ppm
250 ppm
500 ppm
250 ppm
500 ppm
50 ppm
500 ppm
250 ppm
500 ppm
250 ppm
500 ppm
25% LEL
50% LEL
Programming
AlarmC
225 ppm
9 ppm
22.5% Vol.
900 ppm
900 ppm
900 ppm
900 ppm
900 ppm
900 ppm
90% LEL
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E3point

Table of Contents