Using The Setrelay Menu - Honeywell IAQPoint2 User Manual

Programming and Calibration

Using the SetRelay Menu

Using the SetRelay Menu
The SetRelay menu lets users specify whether the the relay for the event
will be in failsafe mode and whether the Silence button on the user
interface (front of housing) will be enabled for this event.
Press enter to select the menu and use the arrows to scroll through the
options:
FAILSAFE?
Silence
When you have selected the option and pressed enter, the field is
disabled and you can proceed to the next screen. Use the arrows to
move to the next menu.
40
Puts the relay in Failsafe mode (the default setting is no
failsafe).
Enables the Silence button function of the user
interface for this event.
301EM User Manual