Updating The Firmware; To Update The Firmware - Sun Microsystems Sun Fire T200 Installation Manual

A
A P P E N D I X

Updating the Firmware

The flashupdate command updates both the service processor firmware and the
host firmware.
The flash image consists of the following components:
System controller firmware
■
OpenBoot
■
POST
■
Reset/Config
■
Sequencer
■
Partition description
■
Updating the Firmware
To use the features and fixes in subsequent firmware releases, perform this
procedure.

To Update the Firmware

▼
1. Make sure that the SC Ethernet management port is configured.
This is required to access the new flash image over the network. See
the System for the First Time" on page 35.
"Powering On
51