To Reset The System Controller - Sun Microsystems Sun Fire T200 Installation Manual

TABLE 3-1
parameter
ser_data
netsc_enetaddr
sys_enetaddr

To Reset the System Controller

▼
After all of the configuration parameters are set, you must reset the system controller
for the new values to take affect.
●
Issue the resetsc command.
You are prompted to confirm that you want to reset the system controller. Reply y
when prompted.
sc> resetsc
Are you sure you want to reset the SC [y/n]? y
User Requested SC Shutdown
Note – You can specify the –y flag to the resetsc command and bypass the
confirmation message.
The system controller resets, runs diagnostics, and returns to the login prompt.
ALOM POST 1.0
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTYC - Internal Loopback Test
TTYD - Internal Loopback Test
....................
42 Sun Fire T2000 Server Installation Guide • April 2006
Sample Configuration Parameter Settings (Continued)
value
8
xx:xx:xx:xx:xx:xx
xx:xx:xx:xx:xx:xx
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test, PASSED.