Index - Sun Microsystems Sun Fire T200 Installation Manual

Index

Symbols
#. escape sequence for system console, 49
^] escape character for telnet, 44
A
AC power cables and standby mode, 30
accessing ALOM-CMT command line, 38
address, IP, 3
addresses, web, See web sites
admin login, setting password for, 39
administration guide, xix
Advanced Lights Out Management, See
ALOM-CMT
ALOM-CMT
60 second timeout if not logged in, 35
command line access, 38
management guide, xix
See also system controller
avis NMB-003
classe A, xii
classe B, xii
B
baud rate for serial terminal, 36
bits setting for serial terminal, 36
boot
booting the Solaris OS, 47
booting the Sun Fire T2000 system, 35
OpenBoot PROM boot command, 47
BSMI class A notice, xiii
buttons, See "slide rail assembly locks"
C
cable clip, using, 31 to 33
cable management assembly, 19 to 26
CCC class A notice, xiii
CE mark, xv
certification mark, GOSTR, xiii
CMA, See cable management assembly
command line access, ALOM-CMT, 38
compliance model number, xv
configuration information needed, 3
configuring the network management port, 38
connecting to the system console, 45
connectors illustrated, 27
console command, 45, 49
D
DB-9 TTY connector, 7, 30
declaration of conformity, xv
definitions, See terms, 11
diagnostics, when run, 35
documentation online, xx
E
electrical mode, AC standby, 30
EMC directive 89/336/EEC, xv
enabling the network management port, 38
escape character ^]for telnet, 44
escape sequence #. for system console, 49
Ethernet connection transfer rates, 7
57