FIGURE 2-14
The server should stop after approximately 15 inches (40 cm) of travel.
7. Verify that the cables and the CMA retracted without binding.
8. Adjust the cable hangers and CMA as required.
Dismounting the Server
If it becomes necessary to remove the server from the rack, or to open the server case
for maintenance or hardware upgrades, refer to the Sun Fire T2000 Server Service
Manual for procedures.
26
Sun Fire T2000 Server Installation Guide • April 2006
Slide Rail Release Button
Need help?
Do you have a question about the Sun Fire T200 and is the answer not in the manual?