To Verify The Operation Of The Slide Rails And The Cma; Figure 2-11 Mounting The Left Side Of The Slide Rail - Sun Microsystems Sun Fire T200 Installation Manual

Mounting the Left Side of the Slide Rail
FIGURE 2-11
To Verify the Operation of the Slide Rails and
▼
the CMA
Tip – Two people are needed this procedure: one to move the server in and out of
the rack and one to observe the cables and CMA.
1. For a cabinet or a free-standing rack, deploy the anti-tilt bar.
2. Unlock the slide lock buttons (
chassis, and slowly pull the server out of the rack until the slide rails reach their
stops.
) at the right and lefts sides of the server
FIGURE 2-12
Chapter 2 Installing the Sun Fire T2000 Server 23