Upgrading To Xcp 1071; Resetting The Xscf Firmware; Updating The Openboot Prom Firmware; Upgrading From Xcp 104N - Sun Microsystems SPARC Enterprise M8000 Product Notes

8. 125127-01 – Reboot your domain before proceeding.
9. 125670-02
10. 125166-05

Upgrading to XCP 1071

You can upgrade to XCP 1071 from XCP version 1050 or higher. Refer to the Sun
SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF User's Guide for
instructions.

Resetting the XSCF Firmware

After upgrading the XCP firmware to 1070 or 1071, you must reset the XSCF by
using the rebootxscf(8) command.

Updating the OpenBoot PROM Firmware

To complete updating the OpenBoot™ PROM (OBP) firmware in the target domain,
be sure to restart the domain. You should restart the domain as soon as possible after
completing the update.

Upgrading From XCP 104n

If you are currently running a version earlier than XCP 1050, you must first upgrade
to an interim version of XCP between 1050 and 1070 (inclusive) before upgrading to
XCP 1071. Refer to the product notes document for the target interim version for
instructions.
Sun SPARC Enterprise M8000/M9000 Servers Product Notes 5