Sun Microsystems Sun Fire T200 Installation Manual page 78

example configuration for network management
port, 41
F
FCC notice
class A certification, xv
class A notice, xi
class B notice, xi
feedback comments and suggestions, xx
first time AC power, 35
G
gateway IP address, 3
getting started guide, xix
GOST-R certification mark, xiii
H
handshaking for serial terminal, no, 36
hot-plugging USB ports, 7
http://store.sun.com, 3
http://www.sun.com/documentation, xix, xx
http://www.sun.com/hwdocs/feedback, xx
http://www.sun.com/supportraining, xx
I
ICES-003
class A notice, xii
class B notice, xii
if_network setting, 40
initializing the system, 45
installation instructions, optional components,
reference, 3
installing optional components, 2
inventory list, 2
IP address, 3
L
LEDs, ports, and slots illustrated, 5, 27
left and right sides defined, 11
levers, locking, See "slide rail assembly locks"
list of optional components online, 3
locations of ports, slots, and LEDs, 27
locations of ports, slots, and LEDs (illustration), 5
locator LED button location illustrated, 27
locks, See "slide rail assembly locks"
58 Sun Fire T2000 Server Installation Guide • April 2006
logging into system controller
using network management port, 38, 43
using serial management port, 38
M
manuals online, xx
map of OpenBoot PROM devices, 46
minimum cable connections, 6
mode, AC standby, 30
mounting screws for rack, 16
N
NET0-NET3 ports illustrated, 27, 28
netmask, 3
netmask for system controller, setting
parameters, 40
netsc_ipaddr setting, 40
netsc_ipgateway setting, 40
netsc_ipnetmask setting, 40
network management port
configuring and enabling, 38
not operational until configured, 4, 38
RJ-45 connector, 29
sample configuration settings, 41
null modem cable adapters, 31
null modem cable for TTY serial port, 31
O
online documentation, xx
online list of optional components, 3
online support, xx
OpenBoot PROM device map, 46
optional components listed online, 3
optional components, installation instructions in
service manual, 3
P
parity for serial terminal, no, 36
password command, 39
path names, 46
PCI-E, PCI-X slot locations illustrated, 27
planning, site planning guide, xix
ports illustrated, 27
ports, slots, and LEDs illustrated, 5, 27
power cycling the system, 48