Figure 2-7 Mounting The Chassis On The Slide Rails - Sun Microsystems Sun Fire T200 Installation Manual

d. At the rear of the rack, repeat
rails.
9. Deploy the anti-tilt bar, if the chassis or rack is so equipped.
Caution – The weight of the server on extended slide rails can be enough to
overturn a cabinet.
Caution – The server weighs approximately 40 lb (18 kg). Two people are required
to lift and mount the system into a rack enclosure when using the procedures in this
chapter.
10. Insert the ends of the mounting brackets into the sliding rails (
Mounting the Chassis on the Slide Rails
FIGURE 2-7
18 Sun Fire T2000 Server Installation Guide • April 2006
Step a through Step c. for the rear ends of the
).
FIGURE 2-7