Figure 75: Software Upgrade - In Process - Quasar CM-4251 Series User And Installation Manual

2. From the drop-down menu of binary files in Step 2, select the file to upgrade. In the above
example uImage+userland.img is selected.
3. Click Upgrade. The system verifies that the upgrade file exists and begins to upload the file.
The upgrade status bar is displayed on the page. When the upgrade process is completed,
the Home page is displayed.
4. Close the video browser.
5. From the Windows Start menu, select Control Panel.
6. Select Uninstall a Program.
7. In the Currently installed programs list, select DCViewer.
8. Click Uninstall to delete the existing DCViewer.
9. Install the new DCViewer ActiveX plug-in.
Warning:
Do not unplug power while upgrading firmware.
Note:
Do not change the upgrade file name or the system will fail to find
the file.
Figure 75: Software Upgrade – In Process
Configuration and Operation
75