Adjusting And Framing-Up The Camera View - Quasar CP-3211 User And Installation Manual

11. If the wizard appears for installing the component application DCViewer, follow the
instructions to complete the installation.
Note:
If the password is changed and DVTEL Latitude AdminCenter Discovery feature
is in use, deselect all other proprietary types. Select DVTEL HD Series so that
the new password can be configured in the Discovery tab settings.
Additionally, users can change the camera's network property (either DHCP or Static IP) directly in
the device finding list. Refer to the following section for changing the camera's network property.

6.7 Adjusting and Framing-Up the Camera View

After the camera is connected to the network and running, it is necessary to frame-up the scene and
adjust the camera settings to optimize the picture for the individual scenes. If Latitude is being used,
consider scheduling different settings for changing ambient conditions throughout the day, week,
month or seasons.
To adjust and frame-up the camera view:
1. In the DNA application, click DNA.
2. In the results, click to select the camera.
3. Right-click to open the shortcut menu, and select Browse, or enter the camera's IP address in
your Internet browser's URL address bar.
4. When the Internet browser connects to the camera and prompts for login, do the following:
Log in using the default user name Admin and password 1234. If the password has
previously been changed, use the new password.
Allow the ActiveX to download and choose to install the DVTEL Web Player
(DCViewer).
Tip:
To view greater image detail for more accurate high-definition focusing, on the
web interface Home page, click the Full Screen
view to check the focus.
Note:
Best focusing results can be achieved when the lens iris is fully open (such as at
night in low light). This prevents loss of sharpness if light levels are reduced at
night.
5. During daylight hours, from the web interface's Camera > Exposure screen, select Exposure
Setting > Auto Shutter.
6. Press <√> to confirm the new setting.
Using the DNA Utility to Search and Access the Camera
button and use the full screen
41