Video OCX protocol setting options include:
RTP over UDP
RTP over RTSP (TCP)
RTSP over HTTP
MJPEG over HTTP
Multicast mode – Enter in each field all required data, including Multicast IP address, H.264-1
video port, H.264-2 video port, MJPEG video port, MJPEG audio port, and Multicast TTL.
Note:
MJPEG is not supported by Latitude.
Click Save to confirm the settings.
7.4.4 Video Frame Rate
From the Video Frame Rate screen, you can specify the frames per second (fps) for each video
compression format.
MJPEG/H.264-1/H.264-2 Frame Rate
The default setting of the MJPEG Frame Rate is 30 fps in NTSC and 25 fps in PAL.
The setting range for the H-264-1 Frame Rate is from 1 to 30 in NTSC and 1 to 25 in PAL.
The setting range for the H-264-2 Frame Rate is from 1 to 30 in NTSC and 1 to 25 in PAL.
Click Save to confirm the settings.
Note:
MJPEG is not supported by Latitude.
Figure 71: Video Frame Rate Screen
Configuration and Operation
67