One-Way Clutch System; Construction - Honda V 45 SABRE-VF750S 1982 Shop Manual

-
,
G}\ HONDA
~V45 ~!:::
'83 V45 SABRE, MAGNA ADDENDUM
13, TECHNICAL FEATURES
ONE-WAY CLUTCH SYSTEM
OPTICAL-FIBER ANTITHEFT DEVICE
DNE·WAY CLUTCH SYSTEM
25-31
25-33
First time on a production motorcycle, this system has been proven on the race circuits of Europe in Hondas Gran Prix road
racers.
Rear wheel lock up caused by rapid downshifting and the resulting high engine compression braking force; is prevented by the
slippage of the one-way clutch.
ONIE-VVA' CLUTCH ONE.WAY
t:==t=====::::::~~~lITC:HOUTER
' -__
~~~,~C>
OUTER
• Construction
The one·way clutch is installed with the clutch center inside the clutch outer. Half the clutch plates are controlled by the
one-way clutch. The one-way clutch allows those plates to slip when back loading force during deceleration might normally
cause the rear wheel to lock-up,
Except for the one-way clutch, the primary dril/en gear/clutch assembly is a conl/entional design.
Date of Issue: October, 1982
©
HONDA MOTOR CO., LTD.
393
25-31