Honda V 45 SABRE-VF750S 1982 Shop Manual page 286

REAR WHEEL/SUSPENSION/BRAKE
R.mov. tne shock absorber from the press.
Install the bacX-tlp plate and stop ring.
Place the shodt absorber back in the press with
the air valve up.
Drain 170 cc (5.8 ozl of ATF by slowly com-
pressing the shock absorber.
ATF TO BE REMOVED : 170 ce (5.8 oz)
Remov, the shock absorber from the press.
Removlt th' hose and install the air valve.
Install the shock case boot.
INSTALLATION
Apply paste grease (containing more than 45% of
molybdenum) to the upper and lower mounting
bushings.
NOTE
-
Use paste grease (contaming more than 45%
of molybdenum) as fo1lows:
• MOLYKOTE G PASTE manufactured by
Dow Corning, U.S.A.
·Sta-lube NLGI
#2,
U.S.A.
·Other lubricants of equivalent quality.
Inst811 and torque the upper mount bolt.
TORQUE: 38-48 N·m (3.8-4.8 kll·m, 28-35 ft·l b)
17-14
~ HONDA
~. V45 ~~~::
STOP RING
BACK·UP PLATE
Oil SEAL DRIVER ATIACHMENT
Date of Issue : May, 1982
e
HONDA MOTOR CO., l TO .
•
-
-