Honda V 45 SABRE-VF750S 1982 Shop Manual page 279

Apply MUltipurpose NLGI No.2 grease (MoS2·addi·
tive) to the final driven flange splines and pim.
Install the final driven flange into the rear wheel.
INSTALLATION
Apply Multipurpose NLGI No.2 grease (MoS2·addi·
tive) to the ring gear's final driven flange engage-
ment splines.
Engage the rear wheel with the final drive case, mak·
ing sure the splines are correctly aligned.
Loosen the three final gear Cilse nuts.
Insert the rear axle through the swingarm,'side
collar, brake panel, hub and final drive gear.
Tighten the axle nut.
TORQUE : 60-80 N-m (6.0-8.0 kg-m,
43-58
ft-lb)
Date of Issue: October, 1982
Cl HONDA MOTOR CO., l TO.
- -
,
REAR WHEEL/SUSPENSION/BRAKE
,..
17-7
-