Honda V 45 SABRE-VF750S 1982 Shop Manual page 359

-
DISASSEMBLY
NOTE:
Do not operate the clutch lever after removing
the clutch or it will be difficult to reassemble.
Remove the snap ring, clutch lifter plate, bearing,
lifter guide and lifter rod.
Place the transmission in 6th gear and applv the
rear brake.
NOTE:
When the engine is not in the frame, shift the
transmission into gear and use the shaft holder
(07923-6890101) to hold the output shaft.
Remove the lock nut and lock washer.
Remove the clutch spring set plate, clutch spring
and washer.
Remove the clutch pressure plate.
Remove the clutch plates and discs.
Date of Issue: October, 1982
© HONDA MOTOR
CO.,
lTD.
377
'83 V45 SABRE, MAGNA ADDENDUM
LOCK NUT 17
x
27
mm
COMMERCIALLY AVAILABLE IN U.S.A.
DISCS AN'D
CLUTCH
PLATE
25-15
--
----------------