Honda V 45 SABRE-VF750S 1982 Shop Manual page 131

-
CYLINDE R HE ADIVALVE
Turn the crankshaft clockwise until the T1.3 mark
aligns with the rear crankcase mating surfaces.
Place rags or shop towels in the rear cylinder head
to prevent parts from being dropped into the
crankcase.
RemOlle the rear cylinder intake and exhaust cam
sprocket bolts.
Turn the crankshaft clockwise one turn (360")
and remove thl other Tear cylinder cam sprocket
bolts.
Turn the crankshaft clockwise until the T2.4 mark
aligns with the rear cr.nkuse mating
surface.
Clean the camshaft sprockets with contact cleanet.
Index the front cylinder camshaft sprockets with
the top of the cylinder head. Use a water proof
marker.
Remove the front cylinder intake and exhaust
cam sprocket bolts.
Turn the crankshaft clockwise one turn 1360° )
and remove the other cam sprocket bolts.
Slide the cam sprockets w ith the cam chains off the
camshaft sprocket flange .
Remove the cam chain from the sprockets and
remove the camshaft holders.
10-4
INTAKE CA.'! SPROCKET
EX: H ',UScrc:~M
SPROCKET
LDERS
,
138
Date of Issue: May, 1982
© HONDA MOTOR CO .. L TO.
--------------
-
-