Crankshaft Removal; Crankshaft Inspection; Cam Chain Length Measurement - Honda V 45 SABRE-VF750S 1982 Shop Manual

•
~ HONDA
~.
V45
~~:~:
CRANKSHAFT REMOVAL
Remove the crankshaft.
Remove the cam chain.
CRANKSHAFT INSPECTION
Set the crankshaft on a stand or Vee blocks.
Set a dial indicator on the center main bearing
journal. Rotate the crankshaft two revolutions and
read the runout .
Actual runout is 1/2 of the total indicator reading.
SE R VICE L IM I T: 0.03 mm (0.001 in )
CAM CHAIN LENGTH MEASUREMENT
Place the cam chain on the camshaft sprockets
with the punch marks positioned as indicated.
Secure one camshaft sprocket and apply 13 kg
(29 Ibs) of tension to the other.
Then rnt85ure the distance between the punch
marks as shown.
SERV ICE LIMIT: 326.1 20 m
m
(12.84 in
)
NOTE:
The punch marks should be parallel to each
other.
CRANKSHAFT/P ISTON
CAM CHAI::N .' N')""
(REAR .L I
,
(
,
(FRONT CYLINDER)
.. PUNCH MARKS
Replace the cam chain it it is longer t han the service
limit.
Date of Issue: May, 1982
© HONDA MOTOR CO., l TO.
173
12-7
---