Valve Guide Replacement - Honda V 45 SABRE-VF750S 1982 Shop Manual

•
.-
W SONDA
~ V45 ~!:::
VALVE GUIDE REPLACEMENT
Heat the cylinder head to
l{xtc
(212°F) with a
hot plate or ol/en.
CAUTION:
Do 'lOt
use a torch to
heal the cylinder;
it may cause warping.
To avoid burlU, wear heaJry gloves when
handling the heated cylinder heud.
Support
the
cylinder head and drive out the old
guides from the combustion chamber side of the
cylinder head.
Drive new guides in from the rocker arm side of
the cylinder head.
NOTE:
Cylinder head heat should still be at l00" C
1212°Fl for installation of the new guides .
Let the cylinder head cool to room temperature
and ream the new valve guides.
NOTE .
Use cutting od on the reamer dur ing this
operation.
Rotate the reamer when insert ing Bnd
removing it.
Reface the valve seat (page 10· 14) and clean the
cylinder head thoroughly to remove anv
metal
particles.
Date of Issue : October, 1982
©
HONDA MOTOR CO., l TO .
-
CYLINDER HEAD/VALVE
VALVE GUIDE
DRIVER, 5.5 mm
07742-0010100
VALVE GUIDE DRIVER
07942-3290200 or 07742-0020200
VALVE GUIDE REAMER
•
1<,
10-13
----_.-