Rear Brake Panel; Lining Thickness Inspection - Honda V 45 SABRE-VF750S 1982 Shop Manual

REAR WHEEL/SUSPENSION/BRAKE
Tighten the three geer case nuts.
TORQUE: 60-70 N·m (6.0-7.0 kgm, 53-51 ft·lb)
Tighten the axl' pinch bolt.
TORQUE: 20-30 N-m (2.0-3.0 kg-m, 14-22 ft-Ibl
Place the brake rod through the brake arm pin and
install the brake adjusting nut.
Tighten the brake panel stop bolt.
TOROUE: 35-45 N·m (3.5-4.5 kg-m, 25-33 ft-Ibl
Adjust the rear brake
(page
3·17).
REAR BRAKE PANEL
LINING THICKNESS INSPECTION
Mellsure the feaf brake lining thidtness.
SERVICE LIMIT: 2.0 mm (0,08 in)
DISASSEMBLY
Aemove the rear brake arm.
Aemove the cotter pins and brake shoes.
ASSEMBl Y
Apply grease to the anchor pins and brake cam.
t.WAANING
Con'amifiQ,~d
brake lillings reduu stopping
power, Keep
"NSI
off the brokt! linings. Wipe
any exuu ,r('tut'
011
the cam.
In$tall the brake cam.
Install the braka
ShOMo
Install new cotter pins.
17-8
---
I
292
W HONDA
~ V45 ~~~:!
Date of Issue: October, 1982
©
HONDA MOTOR CO., lTD.
-
-
•
-
--