Honda V 45 SABRE-VF750S 1982 Shop Manual page 103

CLUTCH
ASSEMBLY
Assemble the slave cylinder in the reverse order of
disassembly. The oil seals must be replaced with
new ones whenever they have been remond.
Lubricate the piston and piston seal with 8 medium
grade of Hi·Temperature silicone grease or brake
fluid before assembly.
Be certain the piston seal is seated in the piston
groove.
Place the piston in the cylinder with the oil seal
end facing out.
Install the insulator and slave cylinder.
Connect the clutch hose with the oil bolt and the
two sealing washers.
I nstall the left crankcase rear cover.
FiU the clutch fluid reservoir and ble&d the clutch
system (page
7-4).
7-10
- - -
-----
OIL SEAL
/
PISTON SEAL
/ PISTON SLAVE CYLINDER BODY
@O /
SPRING
SILICONE
GREASE
H18
--
{@~
~[J
,
INSULATOR
Date of I$sue: January, 1982
© HONDA MOTOR CO., LTD.
-
•