One·way Clutch System - Honda V65 MAGNA Shop Manual

(ij\HONDA.
~ V65MAGNA
3.
LFE
ONE-WAY CLUTCH SYSTEM
OPTICAL-FIBER ANTITHEFT DEVICE
ONE·WAY CLUTCH SYSTEM
23-1
23-3
First time on a production motorcycle, this system has been proven on the race circuits of Europe in Hondas Gran Prix road
racers.
Rear wheel lock up caused by rapid downshifting and the resulting high engine compression braking force; is prevented by the
slippage of the one-way clutch.
CLUTCH
CENTER
ONE-WAY CLUTCH
ONE-WAY
CLUTCH OUTER
CLUTCH OUTER
COMP
• Construction
The one-way clutch is installed with the clutch center inside the clutch outer. Half the clutch plates are controlled by the
one-way clutch. The one-way clutch allows those plates to slip when backloading force during deceleration might normally
cause the rear Wheel to lock-up.
Except for the one-way clutch, the primary driven gear/clutch assembly is a conventional design.
Date of Issue: Dec, 1982
© HONDA MOTOR CO., LTD.
335
23-1