Maintaining Vpws Instances - Zte ZXR10 5900E series Configuration Manual

Parameter
[<1-4294967295>]
1+1
1:1
bidirectional
unidirectional
selective
both
aps
master
backup
<pw-name>
For a description of the parameters in Step 6, refer to the following table:
Parameter
preferred
bfd
basic
status
raw
ip
<policy-name>
<track-name>
dynamic
static
<16-1048575>

2.3.3 Maintaining VPWS Instances

To maintain VPWS instances on the ZXR10 5900E, run the following command:
SJ-20150114102049-016|2015-03-10 (R1.0)
Chapter 2 MPLS L2VPN Configuration
Description
VCID value
1+1 linear protection
1:1 linear protection
Bidirectional protection
Unidirectional protection
Receiving packages selectively
Receiving all packages
Enables the APS state machine
Enables the MC-APS state machine, and sets it as the
master device
Enables the MC-APS state machine, and sets it as the
backup device
Name of the PW interface.
Description
The local PW uses the control word
VCCV BFD function
BFD session has only the detection capability
BFD has both the detection capability and the status
advertisement capability
BFD PDU uses the Raw encapsulation with no IP or UDP
header
BFD PDU uses the encapsulation with both the IP and UDP
header (control-word encapsulation)
Name of the TE tunnel
Name of a Track example
PW interface type is dynamic
PW interface type is static
Range of the PW label
2-23
ZTE Proprietary and Confidential