Maintaining Mpls L2Vpn Instances - Zte ZXR10 5900E series Configuration Manual

2.1.3 Maintaining MPLS L2VPN Instances

To maintain MPLS L2VPN instances on the ZXR10 5900E, run the following commands:
Command
ZXR10(config)#
ZXR10(config)#
ZXR10(config)#
<instance-name> detail]|[peer <ipv4-address> detail]|[detail ]}
For a description of the parameters, refer to the following table:
Parameter
<instance-name>
<ipv4-address>
The following is sample output from the show l2vpn brief command:
ZXR10(config)#show l2vpn
VPLS count:1
name
test
ts
zte
For a description of the parameters in the execution result, refer to the following table:
Parameter
name
type
Default-VC ID
PW
AC
description
The following is sample output from the show l2vpn summary command:
ZXR10(config)#show l2vpn summary
SJ-20150114102049-016|2015-03-10 (R1.0)
show l2vpn brief
show l2vpn summary
show l2vpn forwardinfo {[vpnname
Description
VPN instance name
PW's peer IP address
brief
VPWS count:1 MSPW count:1
type
VPLS
MSPW
VPWS
Description
VPN instance name
VPN instance type
Default VC ID of the VPLS instance
Number of PWs
Number of ACs
Description of the VPN
Chapter 2 MPLS L2VPN Configuration
Default-VCID PW AC
0 1 0
- 0 0
- 0 0
2-5
ZTE Proprietary and Confidential
Function
Displays the brief information
about all L2VPN instances.
Displays the number of the
configured L2VPN instances.
Displays the detailed forwarding
information about each L2VPN
instance. Users can query the
detailed forwarding information
through the VPN instance name,
remote LSRID, and VCID.
description