Zte ZXR10 5900E series Configuration Manual page 81

labels
signal
oam status
redundancy
application
MAC-withdraw : received
local-VCCV
remote-VCCV
actual-VCCV
LDP session
attachment-circuit : vlan200
local-description
remote-description : ??
For a description of the parameters in the execution result, refer to the following table:
show Command Output
PW entity
LSPs formed
C-bits
MTU
local
remote
negotiated
Labels
local
remote
signal
Configured
Received
Negotiated
Sent
AC ready
application
SJ-20150114102049-016|2015-03-10 (R1.0)
negotiated : ??
: local : 81920
: Configured : YES
Negotiated : NO
AC ready : YES
: local : PSN rcv(0),snd(0); AC rcv(1),snd(1); Error(0)
remote : PSN rcv(?),snd(?); AC rcv(?),snd(?); Error(?)
: local : ??
negotiated : ??
: service-type : VPWS
: 0
: CC-type : NO
: CC-type : ??
: CC-type : ??
: The LDP session's state is NON, please check it.
: vlan200
Description
Address, VCID, and PW type of the peer end
Whether it is used on the data layer
Control word information
MTU value of AC interfaces
Whether the local end supports the CWORD
Whether the peer end supports the CWORD
Whether the negotiation result shows that the CWORD is
supported
Tag information
Local tag value
Remote tag value
Signalling information
Whether the PW interface is configured
Whether the peer mapping message is received
Whether the signalling negotiation is successful
Whether local end sends a mapping message to the peer end
Whether the binding interface is in up status (for VPWS)
Application information
Chapter 2 MPLS L2VPN Configuration
, remote : ??
, Received : NO
, Sent : NO
, remote : ??
, instance-id: 1
, sent : 0
, CV-type : NO
, CV-type : ??
, CV-type : ??
2-27
ZTE Proprietary and Confidential