Zte ZXR10 5900E series Configuration Manual page 12

Easy-maintenance mpls routing switch
Hide thumbs Also See for ZXR10 5900E series:
Table of Contents

Advertisement

ZXR10 5900E Series Configuration Guide (VPN)
Step
Command
5
ZXR10(config)#
6
ZXR10(config-if-interface-name)#
vrf-name>
7
ZXR10(config-if-interface-name)#
ip-address>< netmask>
Descriptions of the parameters used by step 1, 2, 3 and 4 are shown below.
Parameter
<vrf-name>
<route-distinguisher>
{ipv4|ipv6}
import
export
both
<extended-community>
Configuring Static Route Protocol Between CE and PE
In order to run static route protocol between CE and PE, a static route pointing to CE needs
to be configured on PE, and the static route needs to be distributed to BGP.
To run static route protocol between CE and PE, perform the following steps on ZXR10
5900E.
Step
Command
1
ZXR10(config)#
mask>{<forwarding-router's-addres>[global]|<interface-name
>[<forwarding-router's-address>]}[<distance-metric>][metric
<metric-value>][tag <tag-value>][bfd enable][track
<track-name>][name <description-name>]
SJ-20150114102049-016|2015-03-10 (R1.0)
interface < interface-name>
ip vrf forwarding <
ip address <
Description
VRF name, 1-32 characters. The name is only valid locally, which
is used for binding an interface to the VPN.
VRF RD, there are three formats, <1-65535>:<0-4294967295> or
A.B.C.D:<0-65535> or <1-65535>.<0-65535>:<0-65535>.
Activate IPv4 or IPv6 address family.
Import the route to VRF according to route-target extension
community attribute
Export the VRF route with route-target extension community
attribute
It is equal to enable import and export at the same time.
The route-target extension community attribute, there are three
formats, <1-65535 >:<0-4294967295 >or A.B.C.D:<0-65535> or
<1-65535>.<0-65535>:<0-65535>
ip route vrf {mng |<vrf-name>}<prefix><net-
1-6
Function
This enters interface
configuration mode.
This associates interface to
VRF.
Delete the existent IP address
of the interface before using
this command.
This configures interface
address.
Function
This configures a static route
pointing to CE on PE.
It is required to specify a VRF to
which this static route belongs.
ZTE Proprietary and Confidential

Advertisement

Table of Contents
loading

Table of Contents