Zte ZXR10 5900E series Configuration Manual page 38

ZXR10 5900E Series Configuration Guide (VPN)
Threshold for warning message 75%
For address family: VPNv6 Unicast no activate
Weight is 0
All received nlri 0, unnlri 0, 0 accepted prefixes, 0 deleting prefixes
All sent nlri 0, unnlri 0, 0 advertised prefixes
Maximum limit 4294967295
Threshold for warning message 75%
For address family: L2VPN VPLS no activate
Weight is 0
All received nlri 0, unnlri 0, 0 accepted prefixes, 0 deleting prefixes
All sent nlri 0, unnlri 0, 0 advertised prefixes
Maximum limit 4294967295
Threshold for warning message 75%
For address family: Route Target no activate
Weight is 0
All received nlri 0, unnlri 0, 0 accepted prefixes, 0 deleting prefixes
All sent nlri 0, unnlri 0, 0 advertised prefixes
Maximum limit 4294967295
Threshold for warning message 75%
Totally update pkt block 301 times
Currently no update pkt block in spool buf
Last after established, type:feas pkt, last ticks:4
Max last time from peer born, type:feas pkt, last ticks:6
Totally real pkt block 0 times
Currently no real pkt block in spool buf
Connections established 2
Last error code is 4
Last reset 1w0d, reset due to Peer timeout
Local host: 1.1.1.1, Local port: 21675
Foreign host: 1.2.3.4, Foreign port: 179
Use show bgp vpnv4 unicast vrf vpn1 summary on PE4 to view the EBGP neighborhood
establishing with 200.1.1.2.
PE4#show bgp vpnv4 unicast vrf vpn1 summary
Neighbor
200.1.1.2
Use show bgp vpnv4 unicast neighbor 4.5.6.7 on PE3 to view.
PE2#show bgp vpnv4 unicast neighbor 4.5.6.7
BGP neighbor is 4.5.6.7, remote AS 100, external link
BGP version 4, remote router ID 4.5.6.7
BGP state = Established, up for 1w0d
Last read update 1w0d, hold time is 180 seconds,
keepalive interval is 60 seconds
Neighbor capabilities:
SJ-20150114102049-016|2015-03-10 (R1.0)
Ver As MsgRcvd
4 65000 0
MsgSend Up/Down
0 00:15:00
1-32
State/PfxRcd
0
ZTE Proprietary and Confidential