Zte ZXR10 5900E series Configuration Manual page 78

ZXR10 5900E Series Configuration Guide (VPN)
Command
show l2vpn brief
ZXR10#
show l2vpn summary
ZXR10#
show l2vpn forwardinfo {[vpnname <instance-name>]|[p
ZXR10#
eer <ipv4-address>]}[detail]
show pwe3 signal
ZXR10#
show pwe3 signal fec128 {detail [local-label <16-1048575>|
ZXR10#
peer <peerip>]
show pwe3 signal statistics
ZXR10#
The following is sample output from the show l2vpn brief command:
ZXR10(config)#show l2vpn brief
VPLS count:1
name
test
zte
For a description of the parameters in the execution result, refer to the following table:
show Command Output
VPLS count
VPWS count
MSPW count
name
type
PW
AC
description
The following is sample output from the show l2vpn summary command:
ZXR10(config)#show l2vpn summary
The summary information about configured L2VPN:
vpn type
SJ-20150114102049-016|2015-03-10 (R1.0)
VPWS count:1 MSPW count:0
type
VPLS
VPWS
Description
Number of VPLS instances
Number of VPWS instances
Number of MSPW instances
Instance name
Instance type
Number of PWs configured for an instance
Number of ACs configured for an instance
Description information about an instance
configure/maximum
Default-VCID PW AC
0 1 0
- 0 0
2-24
ZTE Proprietary and Confidential
Function
Displays the list of LSVPN
instances and the number of
AC and PW interfaces bound to
L2VPN instances.
Displays the number of L2VPN
instances.
Displays the valid PW list in
accordance with the instance
name.
Displays the brief information
about the PW.
Displays the PW information in
detail.
Displays the static information of
PW signalling states.
description