Zte ZXR10 5900E series Configuration Manual page 48

ZXR10 5900E Series Configuration Guide (VPN)
Command
show ip vrf detail
ZXR10#
When the detailed information of the VRF is displayed, the information related to route
restriction and alarm is displayed. The following is a sample output of the show ip vrf detail
command:
ZXR10(config)#show ip vrf detail
VRF mng (VRF Id = 2048); default RD not set
Address family ipv4:
No Export VPN route-target communities
No Import VPN route-target communities
No import route-map
No export route-map
Address family ipv6:
No Export VPN route-target communities
No Import VPN route-target communities
No import route-map
No export route-map
Mpls label mode:
ipv4 VRF label allocation mode: per-prefix
ipv6 VRF label allocation mode: per-prefix
Interface:
mgmt_eth
VRF 1 (VRF Id = 1); default RD 1:1
Description: abcd
Address family ipv4:
Export VPN route-target communities
1:1
Import VPN route-target communities
1:1
No import route-map
No export route-map
Route warning limit 100000
priority:
No import multicast-route
No static outlabel configed
No static tunnel configed
Address family ipv6:
Export VPN route-target communities
3:4
Import VPN route-target communities
3:4
Import route-map: 4
SJ-20150114102049-016|2015-03-10 (R1.0)
2
1-42
ZTE Proprietary and Confidential
Function
This shows VRF configuration is
detail.