Zte ZXR10 5900E series Configuration Manual page 79

VPLS
VPWS
MSPW
For a description of the parameters in the execution result, refer to the following table:
show Command Output
vpn type
configure/maximum
The following is sample output from the show l2vpn forwordinfo command:
ZXR10(config-vpws-sdu-pw)#show l2vpn forwardinfo
Headers: PWType - Pseudowire type and Pseudowire connection mode
Codes:
PeerIP
1.2.3.4
For a description of the parameters in the execution result, refer to the following table:
show Command Output
PeerIP
VCID
PWType
State
Llabel
Rlabel
VPNowner
The following is sample output from the show pwe3 signal command:
ZXR10#show pwe3 signal
The signal information of FEC 128/129 PWs in brief:
Headers: Neighbourhood - neighbour's IP address, LDP state and related PW name;
Service - PW encapsulation mode and service instance's type and index;
AIIs - target AII and source AII (FEC129 only);
Descriptions - remote description and local description (FEC128 only);
Labels - local label (in label) and remote label (out label)
Codes : L - Local configured; M - Mapping received; N - Negotiated;
S - mapping Sent; A - AC ready (VPWS) or service Attached (VPLS/MSPW);
C - Control word used;
SJ-20150114102049-016|2015-03-10 (R1.0)
Description
VPN type
Number of configured instances/maximum number of instances
Llabel - Local label, Rlabel - Remote label
VPNowner - owner type and instance name
H - HUB mode, S - SPOKE mode, L - VPLS, W - VPWS, M - MSPW
VCID PWType
10 Ethernet
Description
Router ID of the PW pee
PW vcid
PW type
PW state
Local label
Remote label
VPN instance where the PW belongs to
Chapter 2 MPLS L2VPN Configuration
1/4095
1/4095
0/8192
State Llabel Rlabel
UP 81920 81920
2-25
ZTE Proprietary and Confidential
VPNowner
W: zte