Configuring A Vpls - Zte ZXR10 5900E series Configuration Manual

PW has two transmission modes, Spoke and Hub modes. To solve the full-connection
broadcast loop and realize the hierarchical accessing, people define PW transmission
attributes Spoke and Hub modes and AC Server/Client mode.
mechanism, PE broadcasts (flooding) broadcast, multicast and unknow frames to other
network members. The broadcast rules of different modes are described below.
l
Broadcast the broadcast packets received from a Spoke mode PW to all ACs (Client
and Server), Hub mode PWs and other Spoke mode PWs.
l
Broadcast the broadcast packets received from a Server (Server-AC) to other ACs
(Client and Server), all Spoke mode PWs and Hub mode PWs.
l
Broadcast the broadcast packets received from a Hub mode PW to all Server-ACs
and Spoke mode PWs, but not broadcast to other Hub mode PWs and all Client-ACs.
l Broadcast the broadcast packets received from a Client (Client-AC) to all Server-ACs
and Spoke mode PWs, but not broadcast to Hub mode PWs and other Client-ACs.

2.2.2 Configuring a VPLS

To configure a VPLS on the ZXR10 5900E, perform the following steps:
Step Command
1
ZXR10(config)#
2
ZXR10(config-vpls)#
-name>
ZXR10(config-vpls)#
<pw-name>[spoke]
ZXR10(config-vpls)#
ZXR10(config-vpls)#
<1-4294967295>
ZXR10(config-vpls)#
ZXR10(config-vpls)#
>
ZXR10(config-vpls)#
3
ZXR10(config-vpls-zte-ac-vlan2)#
params ethernet
4
ZXR10(config)#
ZXR10(config)#
ZXR10(config-vpls-zte)#
ZXR10(config-vpls-zte-pw-pw1)#
<ipv4-address>[ vcid <1-4294967295>]
SJ-20150114102049-016|2015-03-10 (R1.0)
vpls <instance-name>
access-point<interface
pseudo-wire
mtu <60-9216>
default-vcid
mac
description<description
mac-withdraw
access-
pw pw1
vpls zte
pseudo-wire pw1
neighbor
2-9
Chapter 2 MPLS L2VPN Configuration
In VPLS working
Function
Creates a VPLS instance.
Configures the binding relationship between
VPLS instances.
Configures the binding relationship between
the PW and the VPLS instance.
Configures the maximum transfer unit for
the VPLS instance.
Configures the default VC ID for the VPLS
instance.
Enters MPLS MAC configuration mode.
Configures the description for the VPLS
instance.
Enables the mac-withdraw function.
Configures the Ethernet parameters for the
AC.
Configures the PW.
ZTE Proprietary and Confidential