Zte ZXR10 5900E series Configuration Manual page 64

ZXR10 5900E Series Configuration Guide (VPN)
Step Command
5
ZXR10(config-vpls-zte-pw-pw1-
neighbour-1.1.1.1)#
<policy-name>
ZXR10(config-vpls-zte)#
ZXR10(config-vpls-zte-pw-pw1)#
1.1.1.1 vcid 100
ZXR10(config-vpls-zte-pw-pw1-
neighbour-1.1.1.1)#
local-label <16-1048575> remote-label
<16-1048575>}
ZXR10(config-vpls-zte-pw-pw1-
neighbour-1.1.1.2)#
raw }
6
ZXR10(config-vpls-zte)#
spoke
ZXR10(config-vpls-zte-spoke-pw-pw2)#
dundancy-manager
ZXR10(config-vpls-zte-spoke-pw-
pw2-rm)#
protect-strategy aps
ZXR10(config-vpls-zte-spoke-pw-pw2-
rm)#
ZXR10(config-vpls-zte-spoke-pw-pw2)#
xit
ZXR10(config-vpls-zte)#
<pw-name> protect <pw-name>
For a description of the parameter in Step 1, refer to the following table:
Parameter
<instance-name>
For a description of the parameters in Step 2, refer to the following table:
Parameter
<interface-name>
<pw-name>
<60-9216>
<1-4294967295>
<description>
SJ-20150114102049-016|2015-03-10 (R1.0)
tunnel-policy
pseudo-wire pw1
signal {dynamic|static
encapsulation { tagged |
pseudo-wire pw2
protect-type 1+1 bidirectional
exit
backup-pw
Function
Configures the application tunnel policy for
the PW.
Configures the signaling type for the PW.
neighbour
Configures the encapsulation mode for the
PW.
Configures the standby PW and protection
relationship. You can run the no command
to delete the standby PW.
re
e
Description
VPLS instance name
Description
Name of the AC binding to the VPLS instance
Name of the PW binding to the VPLS instance
Available number of MTUs configured for the VPLS instance
VC ID of the VPLS instance
Description about the VPN instance
2-10
ZTE Proprietary and Confidential