Zte ZXR10 5900E series Configuration Manual page 66

ZXR10 5900E Series Configuration Guide (VPN)
Command
show pwe3 signal statistics
ZXR10#
The following is sample output from the show l2vpn brief command:
VPLS count:1
name
test
ts
zte
For a description of the parameters in the execution result, refer to the following table:
Parameter
VPLS count
VPWS count
MSPW count
name
type
default vcid
PW
AC
description
The following is sample output from the show l2vpn summary command:
ZXR10(config-vpls)#show l2vpn summary
The summary information about configured L2VPN:
vpn type
VPLS
VPWS
MSPW
For a description of the parameters in the execution result, refer to the following table:
show Command Output
vpn type
configure/maximum
The following is sample output from the show l2vpn forwordinfo command:
ZXR10(config)#show l2vpn forwardinfo
Headers: PWType - Pseudowire type and Pseudowire connection mode
SJ-20150114102049-016|2015-03-10 (R1.0)
VPWS count:1 MSPW count:1
type
VPLS
MSPW
VPWS
Description
Number of VPLS instances
Number of VPWS instances
Number of MSPW instances
Instance name
Instance type
Default VCID value of an instance
Number of PWs configured for an instance
Number of ACs configured for an instance
Description information about an instance
Description
VPN type
Number of configured instances/maximum number of instances
Llabel - Local label, Rlabel - Remote label
Function
Displays the signaling status statistics
information of each type of PW.
Default-VCID PW AC
0 1 0
- 0 0
- 0 0
configure/maximum
1/4095
1/4095
1/8192
2-12
ZTE Proprietary and Confidential
description