Zte ZXR10 5900E series Configuration Manual page 60

ZXR10 5900E Series Configuration Guide (VPN)
The summary information about configured L2VPN:
vpn type
VPLS
VPWS
MSPW
For a description of the parameters in the execution result, refer to the following table:
Parameter
vpn type
configure/maximum
description
The following is sample output from the show l2vpn forwardinfo detail command:
ZXR10#show l2vpn forwardinfo detail
Headers : ALLOK - Pseudowire Forwarding
Codes
-----------------------------------------------------------------------------
Service type and instance name:[VPLS
Peer IP address
Connection mode
Signaling protocol
Last status change time : 2d 21:25:45
MPLS VC local label
SDU name
Remote status
Tunnel label
Output interface
Imposed label stack
For a description of the parameters in the execution result, refer to the following table:
show Command Output
Name
Peer
SJ-20150114102049-016|2015-03-10 (R1.0)
PWNF - Pseudowire Not Forwarding
AR - Local AC (ingress) Receive Fault
AT - Local AC (egress) Transmit Fault
PSNR - Local PSN-facing PW (ingress) Receive Fault
PSNT - Local PSN-facing PW (egress) Transmit Fault
PWFS - Pseudowire forwarding standby
RS - Request switchover to this PW
PWSA - Pseudowire Status All Fault
: -unknown, *yes, .no
: 172.168.9.190
: HUB
: Static PW
: 100
: sdu3
: -
: { 16389 }
: vlan314
: { 200 16389 }
configure/maximum
1/4095
1/4095
1/8192
Description
VPN instance type
Number of the configured instances/maximum performance
parameters
Description of the VPN
zte]
VC status
VC ID
VC type
Create time
Remote label : 200
Control Word : DISABLE
PW FRR type
Description
VPN instance name
Remote LSR ID
2-6
ZTE Proprietary and Confidential
: UP
: 3
: VLAN
: 2d 23:17
: NULL