Zte ZXR10 5900E series Configuration Manual page 80

ZXR10 5900E Series Configuration Guide (VPN)
Marks : ?unknown;.placeholder;^decimal vcid;$auto_;*ellipsis;NULL-empty string
---------------------------------------------------------------------------
Neighbourhood
--------------- ---------- ---------- ------------------------------ ------
1.1.1.2
Ready pw1
For a description of the parameters in the execution result, refer to the following table:
show Command Output
remote-pe-id
vcid
pw-type
local
remote
use
CRNSA
type
owner
sesn
The following is sample output from the show pwe3 signal fec128 detail command:
ZXR10#show pwe3 signal fec128 detail
The detailed signal information of dynamic PWs or PW-segments:
Some signal information are referred to as follows:
NON - the LDP session is absent,
UP - the LDP session is OPERATIONAL,
GR1 - the LDP session is reconnecting,
GR2 - the LDP session's remote mappings are recovering,
DOWN - not UP(or NON,or GR1,or GR2).
PW entity
LSPs formed
C-bits
MTU
SJ-20150114102049-016|2015-03-10 (R1.0)
Up - PW signal procedures succeeded and both VC-LSPs formed;
Down - PW not UP;
Vague - session state is not UP;
Ready - session state is UP;
GR1 - session state is not UP and PW's remote label is staling;
GR2 - session state is UP but PW's remote label is staling as before
AGI/VC-ID Service
100 Ethernet
^^^^^^^^^^ VPWS:1
: < 1.1.1.1 , 1 , Ethernet >
: NO ( LDP session absent )
: local : NO
negotiated : ??
: local : 1500
AIIs/Descriptions
vlan2
vlan2
Description
Peer address
PW vcid
PW type
Local tag
Remote tag
Whether the tag is allocated
PW state information
Application type
VPNid of the PW interface
Session state
, remote
, remote
2-26
Labels Status
81920 UP
81920 LMNSA.
: ??
: ??
ZTE Proprietary and Confidential