Zte ZXR10 5900E series Configuration Manual page 32

ZXR10 5900E Series Configuration Guide (VPN)
P(config)#mpls interface vlan2
P(config)#mpls interface vlan3
P(config)#interface loopback1
P(config-if-loopback1)#ip address 10.10.2.2 255.255.255.255
P(config-if-loopback1)#exit
P(config)#router ospf 1
P(config-ospf-1)#network 10.0.0.0 0.255.255.255 area 0.0.0.0
P(config-ospf-1)#exit
P(config)#mpls ldp instance 1
P(config-ldp-1)#router-id loopback1
PE2 configuration (Here, PE2 connects to CE2 by Ethernet sub-interface),
PE2(config)#ip vrf test1
PE2(config-vrf-test1)#rd 100:1
PE2(config-vrf-test1)#address-family ipv4
PE2(config-vrf-test1-af-ipv4)#route-target import 100:1
PE2(config-vrf-test1-af-ipv4)#route-target export 100:1
PE2(config-vrf-test1-af-ipv4)#exit
PE2(config-vrf-test1)#exit
PE2(config)#interface loopback1
PE2(config-if-loopback1)#ip address 10.10.3.3 255.255.255.255
PE2(config-if-loopback1)#exit
PE2(config)#interface vlan3
PE2(config-if-vlan3)#ip address 10.10.23.3 255.255.255.0
PE2(config-if-vlan3)#exit
PE2(config)#interface loopback64
PE2(config-if-loopback64)#ip vrf forwarding test1
PE2(config-if-loopback64)#ip address 64.64.64.2 255.255.255.255
PE2(config-if-loopback64)#exit
PE2(config)#mpls ldp instance 1
PE2(config-ldp-1)#interface vlan3
PE2(config-ldp-1-if-vlan3)#exit
PE2(config-ldp-1)#exit
PE2(config)#mpls interface vlan3
PE2(config)#interface vlan4
PE2(config-if-vlan4)#ip address 10.10.10.1 255.255.255.0
PE2(config-if-vlan4)#exit
PE2(config)#router ospf 1
PE2(config-ospf-1)#network 10.0.0.0 0.255.255.255 area 0.0.0.0
PE2(config-ospf-1)#exit
PE2(config)#router ospf 100 vrf test1
PE2(config-ospf-100)#network 10.10.10.1 0.0.0.0 area 0.0.0.0
PE2(config-ospf-100)#redistribute bgp-int100
PE2(config-ospf-100)#area 0 sham-link 64.64.64.2 64.64.64.1
PE2(config-ospf-100)#router-id 64.64.64.2
1-26
SJ-20150114102049-016|2015-03-10 (R1.0) ZTE Proprietary and Confidential