Zte ZXR10 5900E series Configuration Manual page 53

1:1
Import VPN route-target communities
1:1
No import route-map
No export route-map
priority:
No import multicast-route
No static outlabel configed
No static tunnel configed
Address family ipv6 not active.
Mpls label mode:
ipv4 VRF label allocation mode: per-vrf
ipv6 VRF label allocation mode: per-prefix
per-vrf inlabel:
Interface:
vlan1
Advertise another 60 routes from CE1. The number of routes exceeds the threshold
value. PE1 displays the corresponding alarm. VRF zte of PE1 does not restrict extra
routes.
An alarm 200310 ID 162 level 3 cleared at
09:54:59 06-06-2014 sent by ZXR10 MP-0/T1/0
%L3VPN% Routes limit is reached.
Error data:The routes limit of zte is reached
An alarm 200311 ID 163 level 5 cleared at
09:54:59 06-06-2014 sent by ZXR10 MP-0/T1/0
%L3VPN% Routes warning limit is reached.
Warning data:The routes warning limit of zte is reached
PE1(config)#show ip vrf detail zte
VRF zte (VRF Id = 9); default RD 1:1
Address family ipv4:
Export VPN route-target communities
1:1
Import VPN route-target communities
1:1
No import route-map
No export route-map
priority:
No import multicast-route
No static outlabel configed
No static tunnel configed
Address family ipv6 not active.
Mpls label mode:
ipv4 VRF label allocation mode: per-vrf
SJ-20150114102049-016|2015-03-10 (R1.0)
2
212999
2
1-47
Chapter 1 MPLS L3VPN Configuration
ZTE Proprietary and Confidential