Common Hot Plugging Procedure For Pci Express Cards - Fujitsu PRIMEQUEST 2000 Series Administration Manual

CHAPTER 9 PCI Express card Hot Maintenance in Windows

9.2 Common Hot Plugging Procedure for PCI Express cards

4. Replace PCI card by using MMB Maintenance Wizard.
This step is performed by the field engineer in charge of your system.
5. Confirm the replaced card by using Device Manager.
Note
In case of multi-function card, there are some cards that have same segment number, same bus number, and
different function numbers.
In this case, please perform step 2 and step 3 of follows respectively.
Addition procedure
1. Confirm physical location of added PCI card.
2. Add PCI card by using MMB Maintenance Wizard.
This step is performed by the field engineer in charge of your system.
3. Confirm added PCI card by using Device Manager.
Note
Step 4 of replacement procedure and step 2 of addition procedure are performed by the field engineer in
charge of your system.
9.2 Common Hot Plugging Procedure for PCI Express cards
This section describes the PCI Express card replacement procedure that does not involve additional steps
(e.g., when a redundant application is not used).
Note
Insert the PCI Express card securely.
9.2.1 Replacement procedure
1. Confirm the physical location, segment number, and bus number.
a Identify the mounting location of the PCI card to be replaced.
See the figure in B.1 Physical Mounting Locations of Components to check the mounting location
(board and slot) of the PCI card to be replaced.
b Confirm segment number and bus number.
Open component information corresponded to confirmed physical location with step a by using MMB
Web-UI.
For this example, it is explained the method to confirm segment number and bus number of PCI
slot#1 in PCI_Box#0. Select [System] – [PCI_Box] – [PCI_Box#0] in MMB Web-UI, and see
Seg/Bus/Dev of PCIC#1 at PCI-Express Slots in [PCI_Box#0] information.
'Seg' is segment number, and 'Bus' is Bus number in Seg/Bus/Dev information.
This segment number and bus number is the information to confirm by using Device Manager.
303
CA92344-0537-08