Fujitsu PRIMEQUEST 2000 Series Administration Manual page 292
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (329 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
CHAPTER 7 PCI Card Hot Maintenance in SUSE Linux Enterprise Server 12
7.7 Hot Replacement of PCI Express Cards
6. Select [Hot Partition Maintenance (Target unit in a running partition.)] and click [Next]
7. Maintenance mode is set (with information area of MMB Web-UI gray out) and then replacement
instruction for the particular PCIC appears. Take off all cables such as LAN cable and FC cable
connected to the particular PCIC and replace the particular PCIC with this window displayed.
See the figure in
Express card to be replaced.
Note
Do NOT click [Next] until replacing the PCIC.
8. After replacing the particular PCIC, mount cables other than LAN cables.
Note
In GLS configuration with NIC switching way, mount also LAN cables.
'B.1 Physical Mounting Locations of
Components' to confirm the location of the PCI
266
CA92344-0537-08
Advertisement
Table of Contents
Troubleshooting
