CHAPTER 7 PCI Card Hot Maintenance in SUSE Linux Enterprise Server 12
7.1 Dynamic Reconfiguration (DR)
Dynamic Reconfiguration
7.1.2 dr Command Package Install/ Uninstall
This section describes the install /uninstall of the dr command package.
The dr command can be applied using the SVIM application wizard. When installing after building the system,
procure the package from Fujitsu Web download site, and install following the procedure below.
<Common install /uninstall>
Use FJSVdr-util-RHEL<Version number>-x.x.x-x-x86_64.tar.gz.
The file name for the SLES12 dr command package is FJSVdr-util-SLES12-x.x.x-x-x86_64.tar.gz. the
following files are stored.
FJSVdr-util/RPMS/FJSVdr-util-SLES12-x.x.x-x.noarch.rpm
FJSVdr-util/SRPMS/FJSVdr-util-SLES12-x.x.x-x.noarch.rpm
FIGURE 7.1 [Mode] window (Dynamic Reconfiguration)
Item
current status
setting
Setting status of the current DR function
(Enable/Disable)
Dynamic Reconfiguration function Enable/Disable
setting
-Enable
-Disable (Default)
238
Description
CA92344-0537-08