Table 1.10 Tool Bar Menu In [Video Redirection] Window; Table 1.11 Status Bar In [Video Redirection] Window - Fujitsu PRIMEQUEST 2000 Series Administration Manual

CHAPTER 1 Network Environment Setup and Tool Installation
1.6 Management Tool Operating Conditions and Use
Immediate Reset
Pulse NMI
Graceful Reset (Reboot)
Graceful Power off (Shutdown)
Set Boot Options
Help
About JViewer
Server Information
(*1) Set mouse mode to 'Hide mouse mode' when operate LSI WebBIOS since action of cursor in LSI
WebBIOS is adjusted to actual action of your mouse cursor.
When you use two displays to operate LSI WebBIOS in Legacy Mode, use primary display of monitor 1.
If you set to 'Hide mouse mode' in secondary display of monitor 2, cursor does not run. Even if you set to
'Hide mouse mode', it is no problem to use primary display and operate UEFI.
(*2) Power menu is shown in only PRIMEQUEST 2800B3/2800B2/2800B. It is not shown in other models.
Sometimes you cannot operate any power operations because power button menu is grayed out.
In such case, reconnect the video redirection to select power menu button or perform the power
operation by [Power Control] window of MMB Web-UI.
[Resume Redirection]
[Pause Redirection]
[Full Screen]
[Hard disk/USB]
[Floppy]
[CD/DVD]
[Cursor]
[Softkeyboard]
[Video Record]
[Hot Keys]
[Zoom]
Note
Menu Bar

TABLE 1.10 Tool Bar menu in [Video redirection] window

Tool bar
Release pause of [Video redirection] window.
Perform pause of [Video redirection] window.
Maximize [Video redirection] window.
It is required that client and host are the same
resolution.
Set virtual media.
Set virtual media.
Set virtual media.
Display cursor.
Display software keyboard.
Perform setup for record of [Video redirection] such
as record time and save location.
Set Hot keys (shortcut key).
Zoom in or Zoom out [Video redirection] window.

TABLE 1.11 Status Bar in [Video redirection] window

Status Bar
[LALT] Hold down left [Alt] key.
[LALT] button turns red.
[LCTRL] Hold down left [Ctrl] key.
[LCTRL] button turns red.
[RALT] Hold down right [Alt] key.
[RALT] button turns red.
[RCTRL] Hold down right [Ctrl] key.
[RCTRL] button turns red.
[Num] Hold down right [Num] key.
[Num] button turns red.
[Caps] Hold down right [Caps] key.
[Caps] button turns red.
[Scroll] Hold down right [Scroll] key.
[Scroll] button turns red.
Description
Perform hardware reset.
Issue NMI.
Perform Graceful Reset (Reboot).
Perform Graceful Power off (Shutdown)
Perform setup of Boot Options.
Display version information.
If you click the "About JViewer", it may take a few minutes
to appear the dialog box that displays the JViewer
information.
You cannot operate the video redirection in the meantime.
In such a case, please wait a while for the dialog box to
appear, or stop the javaw.exe task in task manager and
then restart the video redirection.
Display information of server.
Description
Description
19
CA92344-0537-08