Patches For Emulex Pci Express (Pcie) Cards; Updating To Xcp 1091; Resetting The Xscf Firmware; Functionality Issues And Limitations - Fujitsu SPARC Enterprise M3000 Product Notes

Patches for Emulex PCI Express (PCIe) Cards

The following Emulex cards require drivers supplied in patch 120222-26:
XSEFC402AF Sun StorageTek Enterprise Class 4Gb Dual-Port Fibre Channel PCI-
■
E HBA
XSEFC401AF Sun StorageTek Enterprise Class 4Gb Single-Port Fibre Channel
■
PCI-E HBA

Updating to XCP 1091

To update your XCP to XCP 1091, refer to the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF User's Guide for instructions.

Resetting the XSCF Firmware

After updating the XCP firmware to 1091, do not fail to reset the XSCF by using the
rebootxscf(8) command.

Functionality Issues and Limitations

This section describes the known issues and limitations at the time of this release.

Notes on Active Directory

While Active Directory is enabled, when you attempt to login to XSCF via the
■
telnet, you might fail to login due to timeout of the query to secondary alternated
server or later.
If the specified timeout is too brief for the configuration, the login process or
■
retrieval of user privilege settings could fail. In such case, specify larger value for
the timeout and then try again.
6 SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010