Fujitsu PRIMEQUEST 2000 Series Administration Manual page 330

CHAPTER 9 PCI Express card Hot Maintenance in Windows
9.2 Common Hot Plugging Procedure for PCI Express cards
Note
In case of multi-function card, there are some cards that have same segment number, same bus number, and
different function numbers.
In this case, please perform Step.2 and Step.3 of follows respectively.
2. Disable target PCI cards by using Device manager.
a Confirm target PCI card in Device Manager.
Open Device Manager, and identify target device with confirmed segment number and bus number in
step 1-b.
Select interface of the type of replaced PCI card, and reference property.
Select [General], see [Location], and confirm that the segment number and bus number is
corresponded to target device or not. You need target device name in step 3, confirm it in advance.
b Disable replaced PCI card with Device Manager.
Select target identified device in step a, and disable it by using Device Manager.
304
CA92344-0537-08