Pci Express Card Addition Procedure In Detail - Fujitsu PRIMEQUEST 2000 Series Administration Manual

CHAPTER 5 Hot Maintenance in Red Hat Enterprise Linux 7
5.8 Hot Addition of PCI Express cards

5.8.2 PCI Express card addition procedure in detail

This section describes operations that must be performed in the PCI Express card addition procedure.
Confirming the slot number of a PCI Express slot
See 'Confirming the slot number of a PCI Express slot' in
detail".
Checking the power status of a PCI Express slot
See 'Checking the power status of a PCI Express slot' in
detail".
Powering on and off PCI Express slots
See 'Powering on and off PCI Express slots' in
Operation for Hot add of PCI Express card by Maintenance Wizard
This item describes Operation for Hot add of PCI Express card (PCIC) by Maintenance Wizard.
Below works are performed by the field engineer in charge of your system.
1. Start [Maintenance Wizard] menu by MMB Web-UI and display [Maintenance Wizard] view.
2. Select [Replace Unit] and click [Next].
"5.7.2 PCI Express card replacement procedure in
"5.7.2 PCI Express card replacement procedure in
"5.7.2 PCI Express card replacement procedure in
188
detail".
CA92344-0537-08